W-Series Flash Welder

 

Our economical line of W-Series flash welders offer maximum quality for minimum cost. These compact units are production ready, and simple to use. They are capable of both welding and annealing lades as a standalone unit, or the AC-200 anneal control can be added for automated 2-stage annealing. With a design that has been proven for over 50 years, you can be assured your welder will last a very long time.

We offer three different models in our W-Series line of welders: the W-10 DS, W-15 DS and the W-20 DS, for welding up to 1", 1.5" and 2" blades respectively. All three models feature adjustable alignment, upset pressure, and weld cut-off; plus built-in annealing capability , dual hardened shafts in the movable carriage assembly, and a high efficiency 220 volt, single phase, 8 KVA transformer.

Options Include:

  • 440 volts
  • Water cooled carriages
  • Built-in Grinder
  • Automated 2-stage anneal control
Item #KVAMax Width - CarbonMax Width - BimetalMin ThicknessMax ThicknessShipping Weight
W-10 DS 8 1 in
25 mm
3/4 in
19 mm
.014 in
.35 mm
.042 in
1 mm
160 lbs
W-15 DS 8 1 1/2 in
38 mm
1 in
25 mm
.014 in
.35 mm
.042 in
1 mm
160 lbs
W-20 DS 8 2 in
52 mm
1 1/4 in
32 mm
.014 in
.35 mm
.050 in
1.3 mm
160 lbs