Our state-of-the-art FW-200 line of band saw blade welders are all PLC controlled with built-in automated 2-stage annealing. We offer both manual and automatic cycling models, all with solid-state controlled weld/anneal voltage. Fixed vertical alignment, extremely rigid clamping and standard water cooling offer maximum durability under heavy production. These welders also combine a large capacity transformer with very high upset force to produce stronger welds than other welders. All weld parameters are independently adjustable for maximum flexibility in fine-tuning. Dial indicators display weld cut-off moment and jaw gap for precise forging length and tooth matching.
STANDARD FEATURES:
- PLC control
- Large 15 KVA transformer
- Standard 220 volts, Single phase (other voltages available)
- Water-cooled carriages
- Digital, programmable motor control
- Precision weld cut-off control for more consistent welds
- Adjustable weld parameters: Jaw Gap, Timing, Weld Voltage, Upset Force Flashing Speed
- Automated 2-stage anneal control with on-the-fly adjustment
- Audio-Visual malfunction alarms
FW-200 HPA
The FW-200 HPA is a hydraulic clamp, pneumatic upset, automatic cycling welder designed to weld carbon and bi-metal blades from .25" x .020" through 2" x .065".
HPA Features:
- Hydraulic clamping with foot pedal actuation
- Pneumatic forging up to 2,250 lbs
- Air blow-off
- 3 operating modes: Automatic, Manual, Weld Only
FW-200 HSA
HSA Features:
The FW-200 HSA is a hydraulic clamp, spring upset, automatic cycling welder designed to weld carbon blades from .25" x .020" through 2" x .050" and bi-metal blades from .25" x .020" through 1.5 " x .050".
- Hydraulic clamping with foot pedal actuation
- Spring forging up to 700 lbs
- Air blow-off
- 3 operating modes: Automatic, Manual, Weld Only
- Spring pressure relief during annealing
FW-200 HS
HS Features:
The FW-200 HS is a hydraulic clamp, spring upset welder designed to weld carbon blades from .25" x .020" through 2" x .050" and bi-metal blades from .25" x .020" through 1.5 " x .050".
- Hydraulic clamping with foot pedal actuation
- Spring forging up to 700 lbs
- 2 operating modes: Normal, Weld Only
- Spring pressure relief during annealing
FW-200 MS
MS Features:
The FW-200 MS is a manual clamp, spring upset welder designed to weld carbon blades from .25" x .020" through 2" x .050" and bi-metal blades from .25" x .020" through 1.25" x .042".
- Spring forging up to 700 lbs
- 2 operating modes: Normal, Weld Only
- Spring pressure relief during annealing