FW-200 MS

 

The FW-200 MS is a manual clamp, spring upset welder designed to weld carbon blades from 1/4" x .020" through 2" x .050" and bi-metal blades from 1/4" x .020" through 1-1/4" x .042".

FW-200 MS Features

  • PLC control
  • Large 15 KVA transformer
  • Standard 220 volts, Single phase (other voltages available)
  • Water-cooled carriages
  • Digital, programmable motor control
  • Precision weld cut-off control for more consistent welds
  • Adjustable weld parameters: Jaw Gap, Timing, Weld Voltage, Upset Force, Flashing Speed
  • Automated 2-stage anneal control with on-the-fly adjustment
  • Audio-Visual malfunction alarms
  • Spring forging up to 700 lbs
  • 2 operating modes: Normal, Weld Only
  • Spring pressure relief during annealing

Specifications

Incoming Power 220 VAC, 50 or 60 Hz (selectable), 80 Amps min.
Welding Transformer 15 KVA
Blade Capacity - Width - Carbon 2 in
52 mm
Blade Capacity - Width - Bimetal 1 1/4 in
32 mm
Blade Capacity - Thickness - Min .020 in
.5 mm
Blade Capacity - Thickness - Max .050 in
1.3 mm
Shipping Weight 650 lbs
FW-Series Options Clear Acrylic Flash Protector
FW-200 Tool Kit (HPA/HSA, HS, MS)
FW-250 Upgrade for 2 5/8" capacity (SO) 
380, 440 Volts
Welded Steel Stand (Included w/ HPA)

Previous page: FW-200 Series Welder
Next page: FW-200 HS